This is the time of year that the Furnace repair and maintenance is more important now than any other time of the year. This is a busy time of the year for most dealers, and so having the up and running at optimal strength is imperative to facing the cold months ahead.really becomes the heart of the home. The first cold snaps are hitting some parts of the country pretty hard.
It is time to acknowledge theand make sure it is running the way it is supposed to. Check out information online and educate yourself on how a works. Perform the preventative maintenance that can make a difference on how proficient the runs.
- Make sure the cycles through start-up to shut-down through the .
- The needs to be clean and level. The older have liquid mercury switches and cleaning will ensure proper function.
- Go to the vents and make sure the temperature matches that of the .
- The safety switch located on the door needs to be cleaned and unobstructed.
- The vent connecting pipes and chimney need to be checked for rust and gaps. These parts can break down over time.
- Check out the wiring and electrical connections for loose tape or unraveled wire nuts. Make sure there are no melted or burned areas.
Looking for a specialist is important. You will want to find a licensed Furnace Repair Contractor in Gwinnett GA, who can do all the maintenance or repair work for you. Looking for a contractor that can answer all of your questions and concerns is important and you want someone who will take you seriously. A respectful courteous Furnace Repair Contractor in Gwinnett GA, will be able to answer the question you might have. Here are some of the questions you can be prepared to ask.
- Which is the best in the market?
- Is my running at the best performance level it can?
- Does my run with energy efficiency?
- Will a new save me money on future utility bills?
- Are the filters easy to change?
- Which of the manufacturers that you represent has been in business the longest?
- How long have you been in the business?
- Do you perform service and maintenance plans?
- What are the financing availability terms and methods?
- Is there a reference list I can call?
- What is the response time typically for emergencies?
Winter is here and you don’t want to be caught off guard without any heat.repair can be expensive and a specialist is ready and waiting in Gwinnett GA, to take care of all your heating system needs before it gets that way. Maintenance is far cheaper than waiting in line with all the other desperate emergency calls.
While trying to repair your Air Conditioner repair contractor. Having some idea about what is wrong with your system will help your service call go much faster and keep your Contractor honest.without a professional is not recommended, there are several things that a homeowner can do to inspect their system and know if it is time to call their
The First thing to check before calling anyone is your . Often times, the system is not working simply because someone changed the settings on the and you just did not know. Make sure you is set to COOL. Then check the temperature.
If the is set correctly then the next step is to check the indoor unit; the large metal unit with all the ductwork. Make sure the fan is running. If the fan is not running, check the ; the unit outdoors. If neither is running, check the circuit breakers that control the units. If this does not work, you will want to call your Air Conditioner repair contractor.
If just the Indoor Air Conditioner repair contractor.unit fan is not running, there may be a malfunction inside that unit like the control board or blower. If this is the case you will need to call your
If the outdoor Air Conditioner repair contractor.fan is not working then there are a few things you can look at. First, see if the copper refrigerant pipes are frozen. This is a common problem and if this is the case, simply turn off your until they thaw and turn it back on. If the pipes freeze again, you will need to call your
If the pipes did not refreeze than your Air Conditioner repair contractor can do and is required by federal law.may be low on coolant and should be refilled. This is something only an
In Gwinnett Georgia, the temperature can get rough and it will always good to make sure you keep you Air Conditioner in top shape. Follow these tips any time you feel you may need to call your Gwinnett County Air Conditioner repair contractor to get the most out of your visit.
If you are located in the Atlanta metropolitan area and are considering installing heating, , and ( ) equipment, you will do well to seek the advice of a professional organization. Whether you need to install equipment to control the atmospheric environment of a large commercial structure, residential home, or an addition to an existing structure, it is important to understand that industry professionals employ a thoroughly proven science when choosing equipment for any given installation.
There is a lot of information available on the Internet, and in industry specific publications, that describes how to sizeequipment for one application or another. By and large, the information found on the Internet is written for homeowners interested in embarking upon do-it-yourself projects. Industry specific publications, though available to the public, are highly technical in nature and are written primarily for professionals. Individuals contemplating utilizing information from those sources to design their own system should proceed with great caution. Aside from the obvious risk of selecting a system that it too small or too large, there are other risks to think about: inadequate electrical or gas supply, code violations, and improper duct sizing are some of the more important ones.
Selecting the right system is more than a matter of gathering relevant facts about a structure, and then performing a load calculation routine. Experience must be factored into the decision process as well. It is true that a load calculation procedure will produce results that indicate how much heating and cooling output is needed, but it is only when the results are tempered with experience that an accurate assessment can be made about the kind of equipment required.
Experienced load calculation. It is only with training and experience that professionals learn to allow for things that a purely technical calculation will not account for.professionals know that they must do more than consult industry manuals and key a few numbers into a computer program. Knowing the type of construction, insulation material properties, and the raw measurements of a building is not sufficient information to rely upon to recommend an optimum system for a client. Over time, buildings settle and cracks develop, insulation degrades, and additions are made that are not constructed of the same material and with the same insulation properties as the original structure. All of these things convolute the process of performing a meaningful
J.R. Bolton Services, Inc. is a firm that services Atlanta and all of the extended metropolitan area. They employ a large staff of trained, experienced professionals that are fully capable of designing and installing a system perfectly matched to your building. Give them a call at 770-449-3962, or visit them on the Internet. They will be happy to assist you with all of your needs.
Atlanta is one of the warmest cities in the country, and there are special needs for energy efficientsystems. Installing the latest products is one part of a focused approach that provides lower electric bills. The newest models are much more efficient, and the Seasonal Energy Efficiency Ratio (SEER) is one of the factors that can be considered during the purchase process. Residents of Atlanta should be sure their SEER rating is at least 14. Higher numbers mean more efficient systems. Here are a few tips for anyone to lower their energy bills.
There is a lot of heat that enters the home through the windows during the daytime. This is known as radiant heat. Shutting the blinds, especially on the south and west side of buildings, can lower the temperature in a home or apartment by as much as 10 degrees in the summer time. Lowering the temperature in this way reduces the amount of work thatneed to do and lowers electrical consumption.
Installing a programmable
A centrally controlled
Install energy efficient windows
Windows and doors also play a large role in the amount of energy that is lost to the air outside of the home. Technology is now being used to create windows that are incredibly efficient and can significantly cut down on energy used by yoursystem. They offer insulated panes of glass that are tinted to resist warming form the sun’s rays. The opening around the windows is also tighter than many old products that were used when a home was built. Heating and cooling were not such big issues during the time when energy was relatively cheap.
The Atlanta home’sand heating system are two of the largest energy consumers. The costs for electricity have risen with the price of gasoline. Installing a new energy efficient air conditioner is one way to reduce the expenses associated with home cooling. Consumers have a number of choices and can have central air installed that is controlled by a . This option is one of the most energy efficient products on the market. The entire unit is easy to operate, and the savings will add up during the life of the more efficient system.
For more questions about energy efficient http://www.jrbolton.com/.please contact J.R. Bolton Services at 770-449-3692 or check out our website at
What exactly is a? It is a test that companies use to test the airtightness or insulation of a home. For years homeowners have been plagued with high energy cost and state laws demand that homes be built according to energy efficiency guidelines. Sadly enough many homes do not pass the technical building code requirements.
Illinois is the first Midwest state to enforce the. is one step ahead or other southern states in testing units for Duct and Airtightness verification in new homes. The testing in began in the early part of 2011 in the month of January. With a few minor setbacks the date was delayed until July 1, 2011. The delay was caused by training materials that were not yet ready. However, energy training and testing is the example that other states will need to follow.
Employees must attend classes to learn the new energy building code laws. Applicants must go through one week of training to become certified DET verifiers. The good news is that each new home being built will have to pass thefor energy efficiency. A good running unit is important when the summer months roll around.
The law is in place to help building owners reduce the excessive use of energy. It is also a way to mandate building improvements that so many buildings would not otherwise get. New homes and buildings are to have up to datewiring and energy efficient appliances. Code laws change often and the problem many associations have is the inability to keep up with them.
So far Wisconsin and Minnesota have limited code enforcement in place and North and South Dakota, Missouri and Kansas have noenergy code in place at all for buildings. The biggest expense for states who may be implementing the mandated energy changes is the training.
The test is great for the simple reason that it locates leaks in the framework where air or heat may be able to escape. The test blower door is perfect for testing the effectiveness ofunits and ductwork. It measures the amount of air flow or lack of and tests for possible leaks. The machine works great on small and medium sized buildings.
Building researchers, contractors, and weatherization personnel uses thein assist them in their home inspections and quality control checks. is normal but too much could signify a potential problem. The air is blown in or out of the building using the blower door fan and the differential between the negative and positive pressures are then noted and recorded.
The Blower Door Test is part of the J.R. Bolton whole house approach. For questions about this or any other http://www.jrbolton.com.service, please contact us at 770-449-3692 or visit our website at
When the time comes to replace yoursystems an, often overlooked, area of the upmost importance is load calculation. It is imperative that your systems have the optimal efficiency to produce not only comfort, but to also reduce the maintenance and operating costs the unit will need over time. Commonly, due to lack of proper calculation, installation costs become more expensive. Further, improperly sized systems tend to break down more often and contribute to issues such as temperature flocculation in the space, and often, with units, improper dehumidification and a “moist” atmosphere which can contribute to mold growth.
It is a common practice for contractors to only refer to the data plate on the unit itself when determining a unit’s relevant usability. While the plate does contain useful information, such as the hourly BTU, it is useful for little more than a guide to help narrow the field of applicable units. Another mishap is basing a unit’s compatibility with consideration of the size of your house; again, such a method is a useful guide but should never be used to determine final accurateunit sizing.
design is almost an art; there are a plethora of factors that will affect your needs. The climate in the area, home orientation and how the unit must compensate for it in conjunction with measurements of relevant structures such as windows, walls, volume of rooms, floor space et cetera make up a substantial portion of accurate determination. Insulation stability, air leakage and duct location must also be factored in and the supply and return components must be strategically located and sized.
Finding a reputable contractor within thearea that can provide quality design is essential. Usage of computer based or written procedure for load calculation along with a written report of said calculation should be a standard practice with any reputable contractor. Be it a home or commercial space, the right unit load calculation now can mean a more comfortable and less expensive future for your space and units alike. For more information about the necessary steps needed when choosing a new Condition System in , visit our website at http://www.jrbolton.com/ or call us at 770-449-3692.
Ais also known as a mini-split system. They are made up to two major components. Those components are a unit mounted on the inside, which is used to deliver the cool air to the room, and a unit that is mounted on the outside of the house. The two components of a are linked by a pair of refrigerant lines, one that carries the power, and another that carries away the condensation from the system. also have and blowers
http://www.jrbolton.com/ or call us at 770-449-3692.are good for homes that do not have ductwork for a central system. have major advantages over a traditional window unit. These advantages include the control, quite, comfortable, and they do not require windows, so you do not have to remove them every season and there is less of a security risk. For more information about please visit our website at
Running a Gas can be very dangerous if it is not kept maintained and running clean. While a gas is running, they produce carbon monoxide. The carbon monoxide is taken away through the venting system. When the system is clean and running efficiently, there is very little carbon monoxide produced. It is recommended that you clean your filter three to four times a year and have your check by a professional at least once a year. It is especially important if you have an older .
New are built with devices that shut off the when there is a problem. Older do not do this and that is what makes it so dangerous. A professional is able to find cracks that would not be visible and that could leak carbon monoxide. Change your filter regularly, they are located inside the front cover of the . If you have any questions about repairs or maintenance in the area or would like to schedule a visit, please contact J.R. Bolton Services at 770-449-3692 or visit our website it www.jrbolton.com.
The most important part of getting a newin is picking the right contractor to install it. There are a lot of people out there who claim to be professionals but only few who qualify. It is essential to research the company you are considering before you choose. The following list is a few things that you should look for while choosing an repair and installations technician.
- Start with trying to get recommendations. If you trust someone and they give you a good recommendation for an technician then start looking into the credentials for that company. It is a great to way to start getting trusted names and narrow down your search.
- When you build a list of Technicians in that you want to look further into, try to find out what memberships or certifications they have. For example, two of the key ones to look for are the ( ) or the ( ). Also look into weather or not they are certified by North American Technician Excellence (NATE). And finally find out if they work with ENERGY STAR. Those groups are very credible in the industry and should be a great start to finding out if they are qualified professionals.
- The first impression you will get from an contractor is from the initial phone call. A technician who gives you a quote over the phone without looking at your system is not a trustworthy person to use. Your home is going to need a bid based on your personal needs and therefore will require a visit to inspect the home.
- When a technician arrives to give you a quote there are a few things to look for. First of all a good company will offer you the high efficiency equipment. They will keep their technicians up to date with the most recent products on the market and will be able to determine whether or not you will save money on your bill. The estimator for the Services company will also do a heat-load or cooling-load calculation survey to determine the most efficient system for you home. This should allow them to determine the proper size of the equipment instead of using your current equipment for sizing.
- When receiving a quote from the contractor you should get a written bid that will outline the cost of equipment and labor. It is also a good idea not to just go with the lowest bid. Most of the time there is a reason for the bid being a little higher.
When picking an http://www.jrbolton.com or call us at 770-449-3692.contractor, use this list in order to find the most professional company. If you have any questions about the services J.R. Bolton Services offers or about any of our qualifications, please visit our website at
Two classifications of
There are two types of central systems, radiant heat and forced air.
Forced Air Central systems work by first heating an exchanger. Then it pushes air through the exchanger, which heats the air, then circulates it throughout the ductwork and into each room through vents.
Radiant Heat central systems work by pushing steam or water through a network of radiators located in each room.
Local systems include wood stoves, , , or even .