This is the time of year that the furnace really becomes the heart of the home. The first cold snaps are hitting some parts of the country pretty hard. Furnace repair and maintenance is more important now than any other time of the year. This is a busy time of the year for most HVAC dealers, and so having the furnace up and running at optimal strength is imperative to facing the cold months ahead.

It is time to acknowledge the furnace and make sure it is running the way it is supposed to. Check out information online and educate yourself on how a furnace works. Perform the preventative maintenance that can make a difference on how proficient the furnace runs.

• Make sure the furnace cycles through start-up to shut-down through the Thermostat.
• The Thermostat needs to be clean and level. The older Thermostats have liquid mercury switches and cleaning will ensure proper function.
• Go to the vents and make sure the temperature matches that of the Thermostat.
• The safety switch located on the furnace door needs to be cleaned and unobstructed.
• The vent connecting pipes and chimney need to be checked for rust and gaps. These parts can break down over time.
• Check out the wiring and electrical connections for loose tape or unraveled wire nuts. Make sure there are no melted or burned areas.

Looking for a specialist is important. You will want to find a licensed Furnace Repair Contractor in Gwinnett GA, who can do all the maintenance or repair work for you. Looking for a contractor that can answer all of your questions and concerns is important and you want someone who will take you seriously. A respectful courteous Furnace Repair Contractor in Gwinnett GA, will be able to answer the question you might have. Here are some of the questions you can be prepared to ask.

• Which furnace is the best in the market?
• Is my furnace running at the best performance level it can?
• Does my furnace run with energy efficiency?
• Will a new furnace save me money on future utility bills?
• Are the filters easy to change?
• Which of the furnace manufacturers that you represent has been in business the longest?
• How long have you been in the business?
• Do you perform furnace service and maintenance plans?
• What are the financing availability terms and methods?
• Is there a reference list I can call?
• What is the response time typically for emergencies?

Winter is here and you don’t want to be caught off guard without any heat. furnace repair can be expensive and a HVAC specialist is ready and waiting in Gwinnett GA, to take care of all your heating system needs before it gets that way. Maintenance is far cheaper than waiting in line with all the other desperate emergency calls.

While trying to repair your furnace without a professional is not recommended, there are several things that a homeowner can do to inspect their system and know if it is time to call their Air Conditioner repair contractor. Having some idea about what is wrong with your system will help your HVAC service call go much faster and keep your HVAC Contractor honest.

Thermostat
The First thing to check before calling anyone is your Thermostat. Often times, the system is not working simply because someone changed the settings on the Thermostat and you just did not know. Make sure you Thermostat is set to COOL. Then check the temperature.

Air Conditioning Units
If the Thermostat is set correctly then the next step is to check the indoor Air Conditioning unit; the large metal unit with all the ductwork. Make sure the fan is running. If the fan is not running, check the heat pump; the unit outdoors. If neither is running, check the circuit breakers that control the Air Conditioning units. If this does not work, you will want to call your Air Conditioner repair contractor.

If just the Indoor Air Conditioning unit fan is not running, there may be a malfunction inside that unit like the control board or blower. If this is the case you will need to call your Air Conditioner repair contractor.

If the outdoor heat pump fan is not working then there are a few things you can look at. First, see if the copper refrigerant pipes are frozen. This is a common problem and if this is the case, simply turn off your HVAC System until they thaw and turn it back on. If the pipes freeze again, you will need to call your Air Conditioner repair contractor.

If the pipes did not refreeze than your HVAC System may be low on coolant and should be refilled. This is something only an Air Conditioner repair contractor can do and is required by federal law.

In Gwinnett Georgia, the temperature can get rough and it will always good to make sure you keep you Air Conditioner in top shape. Follow these tips any time you feel you may need to call your Gwinnett County Air Conditioner repair contractor to get the most out of your visit.

If you are located in the Atlanta metropolitan area and are considering installing heating, ventilation, and Air Conditioning (HVAC) equipment, you will do well to seek the advice of a professional organization. Whether you need to install equipment to control the atmospheric environment of a large commercial structure, residential home, or an addition to an existing structure, it is important to understand that industry professionals employ a thoroughly proven science when choosing HVAC equipment for any given installation.

There is a lot of information available on the Internet, and in industry specific publications, that describes how to size HVAC equipment for one application or another. By and large, the information found on the Internet is written for homeowners interested in embarking upon do-it-yourself projects. Industry specific publications, though available to the public, are highly technical in nature and are written primarily for HVAC professionals. Individuals contemplating utilizing information from those sources to design their own system should proceed with great caution. Aside from the obvious risk of selecting a system that it too small or too large, there are other risks to think about: inadequate electrical or gas supply, code violations, and improper duct sizing are some of the more important ones.

Selecting the right system is more than a matter of gathering relevant facts about a structure, and then performing a load calculation routine. Experience must be factored into the decision process as well. It is true that a load calculation procedure will produce results that indicate how much heating and cooling output is needed, but it is only when the results are tempered with experience that an accurate assessment can be made about the kind of equipment required.

Experienced HVAC professionals know that they must do more than consult industry manuals and key a few numbers into a computer program. Knowing the type of construction, insulation material properties, and the raw measurements of a building is not sufficient information to rely upon to recommend an optimum heating and air conditioning system for a client. Over time, buildings settle and cracks develop, insulation degrades, and additions are made that are not constructed of the same material and with the same insulation properties as the original structure. All of these things convolute the process of performing a meaningful load calculation. It is only with training and experience that professionals learn to allow for things that a purely technical calculation will not account for.

J.R. Bolton Services, Inc. is a firm that services Atlanta and all of the extended metropolitan area. They employ a large staff of trained, experienced professionals that are fully capable of designing and installing a system perfectly matched to your building. Give them a call at 770-449-3962, or visit them on the Internet. They will be happy to assist you with all of your HVAC needs.

There are many ways to cool a house or mobile home other than air conditioning in Atlanta Georgia. You can save money by using a few steps for cooling without using an appliance that always costs money when turned on. Out of the several choices you have for cooling your home in Atlanta Georgia for those high temperatures, the most commonly used is Air Conditioning, but there are other ways to cut back.

Atlanta is one of the warmest cities in the country, and there are special needs for energy efficient Air Conditioning systems. Installing the latest HVAC products is one part of a focused approach that provides lower electric bills. The newest models are much more efficient, and the Seasonal Energy Efficiency Ratio (SEER) is one of the factors that can be considered during the purchase process. Residents of Atlanta should be sure their SEER rating is at least 14. Higher numbers mean more efficient HVAC systems. Here are a few tips for anyone to lower their energy bills.

Shut blinds

There is a lot of heat that enters the home through the windows during the daytime. This is known as radiant heat. Shutting the blinds, especially on the south and west side of buildings, can lower the temperature in a home or apartment by as much as 10 degrees in the summer time. Lowering the temperature in this way reduces the amount of work that air conditioners need to do and lowers electrical consumption.

Installing a programmable Thermostat

A centrally controlled Thermostat can be used to maintain the home at a constant temperature. Allowing the temperature to rise during the times when no one is home is one way to make a building more energy efficient. Keeping the Thermostat at 85 during the days lowers the cooling costs. Keeping the central Thermostat at 78 during the times when the home is occupied is another way to lower costs. This is a comfortable temperature that is easy for air conditioners to maintain.

Install energy efficient windows

Windows and doors also play a large role in the amount of energy that is lost to the air outside of the home. Technology is now being used to create windows that are incredibly efficient and can significantly cut down on energy used by your Air Conditioning system. They offer insulated panes of glass that are tinted to resist warming form the sun’s rays. The opening around the windows is also tighter than many old products that were used when a home was built. Heating and cooling were not such big issues during the time when energy was relatively cheap.

Replacing an Air Conditioning system

The Atlanta home’s Air Conditioning and heating system are two of the largest energy consumers. The costs for electricity have risen with the price of gasoline. Installing a new energy efficient air conditioner is one way to reduce the expenses associated with home cooling. Consumers have a number of HVAC choices and can have central air installed that is controlled by a Thermostat. This option is one of the most energy efficient products on the market. The entire unit is easy to operate, and the savings will add up during the life of the more efficient system.

For more questions about energy efficient Air Conditioning please contact J.R. Bolton Services at 770-449-3692 or check out our website at http://www.jrbolton.com/.

What exactly is a blower door test? It is a test that HVAC companies use to test the airtightness or insulation of a home. For years homeowners have been plagued with high energy cost and state laws demand that homes be built according to energy efficiency guidelines. Sadly enough many homes do not pass the technical building code requirements.

Illinois is the first Midwest state to enforce the blower door test. Atlanta Georgia is one step ahead or other southern states in testing Air Conditioning units for HVAC Duct and Airtightness verification in new homes. The testing in Atlanta Georgia began in the early part of 2011 in the month of January. With a few minor setbacks the date was delayed until July 1, 2011. The delay was caused by training materials that were not yet ready. However, Atlanta Georgia energy training and testing is the example that other states will need to follow.

Employees must attend classes to learn the new energy building code laws. Applicants must go through one week of training to become certified DET verifiers. The good news is that each new home being built will have to pass the blower door test for energy efficiency. A good running Air Conditioning unit is important when the summer months roll around.

The law is in place to help building owners reduce the excessive use of energy. It is also a way to mandate building improvements that so many buildings would not otherwise get. New homes and buildings are to have up to date HVAC wiring and energy efficient appliances. Code laws change often and the problem many associations have is the inability to keep up with them.

So far Wisconsin and Minnesota have limited code enforcement in place and North and South Dakota, Missouri and Kansas have no HVAC energy code in place at all for buildings. The biggest expense for states who may be implementing the mandated energy changes is the training.

The test is great for the simple reason that it locates leaks in the framework where air or heat may be able to escape. The test blower door is perfect for testing the effectiveness of Air Conditioning units and ductwork. It measures the amount of air flow or lack of and tests for possible leaks. The machine works great on small and medium sized buildings.

Building researchers, contractors, and weatherization personnel uses the blower door test in assist them in their home inspections and quality control checks. ventilation is normal but too much ventilation could signify a potential problem. The air is blown in or out of the building using the blower door fan and the differential between the negative and positive pressures are then noted and recorded.

The Blower Door Test is part of the J.R. Bolton whole house approach. For questions about this or any other Air Conditioning service, please contact us at 770-449-3692 or visit our website at http://www.jrbolton.com.

These days, the many reasons to obtain a qualified heating and air Contractor have as much to do with state of the art equipment as with gaining the best air circulation, temperature and air quality controls within the home. People who look to a contractor to learn more about saving money through repair or modernization may not realize how much a proper functioning air conditioner and furnace may also impact their health.

When the time comes to replace your heating and air conditioning systems an, often overlooked, area of the upmost importance is load calculation. It is imperative that your systems have the optimal efficiency to produce not only comfort, but to also reduce the maintenance and operating costs the unit will need over time. Commonly, due to lack of proper calculation, installation costs become more expensive. Further, improperly sized HVAC systems tend to break down more often and contribute to issues such as temperature flocculation in the space, and often, with Air Conditioning units, improper dehumidification and a “moist” atmosphere which can contribute to mold growth.

It is a common practice for contractors to only refer to the data plate on the unit itself when determining a unit’s relevant usability. While the plate does contain useful information, such as the hourly BTU, it is useful for little more than a guide to help narrow the field of applicable units. Another mishap is basing a unit’s compatibility with consideration of the size of your house; again, such a method is a useful guide but should never be used to determine final accurate heating and air unit sizing.

HVAC design is almost an art; there are a plethora of factors that will affect your heating and air conditioning needs. The climate in the Atlanta Georgia area, home orientation and how the unit must compensate for it in conjunction with measurements of relevant structures such as windows, walls, volume of rooms, floor space et cetera make up a substantial portion of accurate determination. Insulation stability, air leakage and duct location must also be factored in and the supply and return components must be strategically located and sized.

Finding a reputable contractor within the Atlanta Georgia area that can provide quality HVAC design is essential. Usage of computer based or written procedure for load calculation along with a written report of said calculation should be a standard practice with any reputable HVAC contractor. Be it a home or commercial space, the right heating and air unit load calculation now can mean a more comfortable and less expensive future for your space and units alike. For more information about the necessary steps needed when choosing a new heating and air Condition System in Atlanta Georgia, visit our website at http://www.jrbolton.com/ or call us at 770-449-3692.

A ductless air conditioner is also known as a mini-split system. They are made up to two major components. Those components are a unit mounted on the inside, which is used to deliver the cool air to the room, and a unit that is mounted on the outside of the house. The two components of a ductless air conditioner are linked by a pair of refrigerant lines, one that carries the power, and another that carries away the condensation from the system. ductless air conditioners also have Thermostats and blowers

ductless air conditioning systems are good for homes that do not have ductwork for a central system. ductless air conditioners have major advantages over a traditional window unit. These advantages include the Thermostat control, quite, comfortable, and they do not require windows, so you do not have to remove them every season and there is less of a security risk. For more information about ductless air conditioners please visit our website at http://www.jrbolton.com/ or call us at 770-449-3692.

Your furnace is a big part of your HVAC System. During the Cold months in Atlanta Georgia it is essential to take safety precautions when running your furnace. There is an important step you can take to ensure your furnace is safe to run and you can get the most out of your HVAC System. That step is cleaning your filter. Keeping your furnace clean is one of the most important things your can do.
Running a Gas furnace can be very dangerous if it is not kept maintained and running clean. While a gas furnace is running, they produce carbon monoxide. The carbon monoxide is taken away through the furnaces venting system. When the system is clean and running efficiently, there is very little carbon monoxide produced. It is recommended that you clean your furnace filter three to four times a year and have your furnace check by a professional at least once a year. It is especially important if you have an older furnace.
New furnaces are built with devices that shut off the furnace when there is a problem. Older furnaces do not do this and that is what makes it so dangerous. A professional is able to find cracks that would not be visible and that could leak carbon monoxide. Change your furnace filter regularly, they are located inside the front cover of the furnace. If you have any questions about furnace repairs or maintenance in the Atlanta Georgia area or would like to schedule a visit, please contact J.R. Bolton Services at 770-449-3692 or visit our website it www.jrbolton.com.